Lightweight flexible stone veneer designed for modular and prefab construction. Factory-applied, cut to the module, and shipped flat – it lifts, fixes and finishes fast with no wet trades, no heavy substrate and no tolerance fight.
Modules leave the factory on schedule. The facade is usually where that schedule breaks. A heavy cladding system adds payload, extends the assembly cycle and forces wet trades into a controlled-environment production line.
Natural stone plus an engineered substructure adds dead load every time you move a module. That is cost in the frame, the crane and the transport plan.
Rendering, tile adhesive and screed need curing time and a controlled environment, tying up a production bay that could be turning over modules.
Cladding that is not cut to the module datum demands on-site cutting, re-work and visible joint variation across the elevation.
Rigid, brittle cladding needs protection, increases packaging and risks break-in-transit claims before the module is even installed.
Flexible stone veneer was built for the factory line. A thin, bendable sheet that applies direct to your substrate or existing panel, cures dry, and cuts to a clean datum.
Apply flexible stone to your module or panel off-site. Controlled environment, repeatable quality, and no exposure to weather or uncertain site conditions.
No rendering, no wet adhesive cure. The panel is ready to move, wrap and ship as soon as the adhesive sets.
We supply panels cut to your module datum and batch-matched across the production run for a consistent elevation.
Curve around transitions, corners and reveals without a specialist joint – useful on balconies, parapets and wrapped modules.
A spec-ready summary of the properties that matter when you specify cladding for an off-site production line.
Around 5-5.5 kg/m2 – about 80% lighter than natural stone, cutting module payload and lifting cost.
2-8 mm sheet, thin enough to keep module depth within tolerance.
A-class fire performance, with ASTM E84 Class A documentation available to support your code submission.
Waterproof, anti-UV, and resistant to freeze-thaw cycling for a long service life on exposed elevations.
Factory-finished facades for apartment and student housing modules, delivered ready to install.
Showrooms, retail pods, washrooms and kiosks where a premium finish has to ship as a complete unit.
Flexible stone applied to cassette panels off-site, then craned into place with minimal on-site trade.
Yes. Flexible stone veneer applies direct to compatible substrates and existing panels off-site, cures dry, and is ready to wrap and ship once the adhesive sets. We also supply panels cut to your module datum.
No. It sits around 5-5.5 kg/m2, about 80% lighter than natural stone, which reduces module payload, transport cost and crane requirements.
Flexible stone bends around corners, transitions and reveals without a specialist joint, which is ideal for balconies, parapets and wrapped modules.
We can provide A-class fire performance with ASTM E84 Class A documentation to support your code submission and compliance package.
Yes. It is waterproof, anti-UV, and resistant to freeze-thaw cycling, so it performs on exposed facades and in a range of climates.
We batch-match panels across the run so the elevation stays consistent, and can supply a finish pre-approved by your specifier before production.
Send us your module drawings and panel sizes. We confirm feasibility, supply cut panels matched to your datum, and send a sample so you can approve the finish before production.
French 
English 
Spanish 
Arabic 
German 